**** FILE 75-38.txt **** These S1D13705 register settings are estimated without test, using SED1374 register settings and applying this rule: 13704 13705 REG[12h] 00h FFh REG[13h] FFh 03h REG[14h] 03h 00h The SED1374 register contents were taken while displaying a 240x320x4 image on a KHS038AA... Kyocera LCD module. See file 74B-38.txt for full documentation of that test. REGISTER CONFIGURATION To assist in interpreting the registers, here is my record of setting them via 1374CFG.exe. PANEL TAB (The following settings are absolutely required by the Kyocera K_S038AA LCD modules) color, single, STN, 8bit, 240 x 320, format 2. (The following settings are within their range in the Kyocera specs for this LCD) FrameRate (fps)=76, InputClock (kHz)=7500. (The following settings are defaults that make the SDU1374 work.) Mod Count = 0, LookUp Table = 4 BPP, MemoryLocation=0xD0000, FPLineStart=16, FPFrameStart=0, FPline Hi, FPframe Hi, Misc. Options all not checked. Robert Joslyn 5/2/2001 Kyocera Industrial Ceramics Corp 800-826-0527 ============================================== 1374PLAY - test utility - version 1.00 (HAL 1.00) Copyright (c) 1998 Epson Research and Development, Inc. All Rights Reserved. (12h, 13h, 14h Patched to 13705 values by Kyocera) =xa = [00] > 18 00011000b 024t [01] > 23 00100011b 035t [02] > 80 10000000b 128t [03] > 03 00000011b 003t [04] > 1D 00011101b 029t [05] > 3F 00111111b 063t [06] > 01 00000001b 001t [07] > 00 00000000b 000t [08] > 04 00000100b 004t [09] > 00 00000000b 000t [0A] > 02 00000010b 002t [0B] > 00 00000000b 000t [0C] > 00 00000000b 000t [0D] > 00 00000000b 000t [0E] > 00 00000000b 000t [0F] > 00 00000000b 000t [10] > 00 00000000b 000t [11] > 00 00000000b 000t [12] > FF 11111111b 255t [13] > 03 00000011b 003t [14] > 00 00000000b 000t [15] > 00 00000000b 000t [16] > 00 00000000b 000t [17] > 00 00000000b 000t [18] > 00 00000000b 000t [19] > 00 00000000b 000t [1A] > 00 00000000b 000t [1B] > 00 00000000b 000t [1C] > 00 00000000b 000t =q =