 |
MECX Fine-Pitch Endmills and Facemills Brochure
Extra fine-pitch increases machining efficiency, lowers cutting forces and is ideal for lower horsepower machines. Available inserts include PR830 for steel, PR905 for cast iron and PR925 for stainless steel.
Download Brochure (pdf/3MB).
|
 |
CA6515/CA6525 CVD Coated Carbide for Stainless Steel Brochure
CVD coated carbide grades for stainless steel. Advantages include minimized notching, burr prevention and reduced edge build-up and adhesion.
Download Brochure (pdf/1MB).
|
 |
TN6020/PV7020 Super Micro-grain Cermet Brochure
Achieve higher cutting speeds and excellent surface finishes
with super micro-grain size TN6020 and PV7020. The fine grain
size provides improved toughness and stability which in turn
leads to greater productivity. Use when excellent surface finishes
are required.
Download Brochure (pdf/1.92MB).
|
 |
Ceranotch Grooving System Brochure
Features our expanded Grooving System. Grooving, threading, face grooving and deep grooving. Cermet, carbide and ceramic grades. Unique Kyocera MY Chipbreaker. A complete system for all your grooving needs.
Download Brochure (pdf/809KB).
|
 |
 |
CA5505/CA5515/CA5525/CA5535 CVD Coated Carbide for Steel Brochure
CVD coated carbide grades for steel. The new bright gold coating technology prevents chip adhesion, sudden fracture and reduces cutting forces. The crack-free coating technology provides higher productivity.
Download Brochure (pdf/1.45MB).
|
|
 |
CA4115/CA4120 CVD Coated Carbide for Ductile Iron Brochure
CVD coated carbide grades for ductile iron. CA4115 is ideal for high speed
continuous machining of ductile iron due to the thick multilayered coating
technology. CA4120 is an excellent choice for interrupted cutting of gray or
ductile iron due to crack-free coating technology.
Download Brochure (pdf/736KB).
|
|
 |
MEC Ultra Hurricane Endmills and Facemills Brochure
The MEC-series cutters are designed to offer higher productivity. The unique
design lowers cutting forces, withstands heavier cuts and allows for
increased feedrates. A silver coating and larger chip pocket radius protect
the tool. There are six insert radii, 0.016", 0.031", 0.047",
0.063", 0.079", and 0.122" available in cast iron, steel, and
stainless steel grades.
Download Brochure (pdf/2.6MB).
|
|
 |
MSR Heavy Roughing Milling Cutter Brochure
A monster of a cutter. Double the metal removal rate and double the
productivity. Notched inserts promote larger depths of cut and excellent chip
control. Heavy machining with low cutting forces.
Download Brochure (pdf/829KB).
|
|
 |
High Temperature Alloy Turning Brochure
Introducing our latest ceramic technology. KX213 Cell Fiber Ceramic is ideal for roughing nickel, iron, and cobalt alloys and hard materials. Cell fiber ceramic
consists of a honeycomb-like structure featuring a matrix of hard center
cores surrounded by a tough outer shell. The technology produces a very tough
and extremely hard ceramic material.
Download Brochure (pdf/322KB).
|
|
 |
KBN510/KBN525 Micro-grain CBN Grades Brochure
Introducing our latest CBN technology. The uniform distribution of the CBN material
improves both wear resistance and toughness. KBN510 is for general purpose
and finishing of hardened steels while KBN525 is ideal for interrupted
machining of hardened steels.
Download Brochure (pdf/902KB)
|
|
 |
KPD001 Super Micro-grain PCD Brochure
The super fine grain structure promotes excellent surface finishes and provides
good wear and fracture resistance with a strong cutting edge.
Download Brochure (pdf/332KB).
|
|
 |
Magic Drill Brochure
The Magic Drill is an indexable drill with four available corners to promote
increased machining efficiency. Excellent chip control makes the drill cut
more reliably and smoothly. The Magic Drill Brochure features 2x, 3x, and 4x
diameter cutting drills. Available insert grades include PR660, PR730, and
PR930. Information on the Adjustable Sleeve, which allows the adjustment of
the cutting diameter on machining centers, is also included.
Download Full Brochure (pdf/618KB)
Download 4-Page Flyer (pdf/344KB)
|
|
 |
Ultra Drill Mill Brochure
The Ultra Drill Mill is a two flute effective, multi-function endmill. It has
improved stability and low cutting resistance. The silver shank coating
protects the tool from chip wear and promotes a long tool life. The Ultra
Drill Mill cutting diameter ranges from 0.63" to 1.98". Inserts are
available in the new coated carbide PR830
Download Brochure (pdf/301KB).
|
|
 |
Strong Bar Brochure
The Strong Bar is a boring bar with an internal damper that reduces vibration,
increasing machining efficiency. The Strong Bars are available for minimum
bores ranging from 0.472" up to 1.25". Both CCMT and WPMT inserts
are available in coated carbide and cement grades.
Download Brochure (pdf/813KB).
|
 |
VF Chipbreaker
Good chip evacuation at small depths of cut and high feed rates. Low cutting resistance. Improved chip evacuation when profi ling and pulling up. Combined with the CA55 series, high efficiency and long tool life is assured for shaft profiling.
Download Brochure (pdf/839KB).
|
 |
CJ Chipbreaker
Good chip evacuation at small depths of cut and high feed rates. Low cutting resistance. Improved chip evacuation when profi ling and pulling up. Combined with the CA55 series, high efficiency and long tool life is assured for shaft profiling.
Download Brochure (pdf/1.25MB).
|
|
Page Top