 |
CA5505/CA5515/CA5525/CA5535 CVD Coated Carbide for Steel Brochure
CVD coated carbide grades for steel. The new bright gold coating technology prevents chip adhesion, sudden fracture and reduces cutting forces. The crack-free coating technology provides higher productivity.
Download Brochure (pdf/1.75MB).
|
 |
 |
CA6515/25 and PR1125 Coated Carbides for Stainless Steel
CVD and PVD coated carbide grades for stainless steel. Advantages include minimized notching, burr prevention and reduced edge build-up and adhesion.
Download Brochure (pdf/1.7MB).
|
 |
Ceramics
Kyocera’s long tradition of cutting edge ceramic technology continues with the new MEGACOAT PT600M grade. Also featured in our new Ceramics brochure are traditional ceramic grades A65, A66N, KS6000, and cell fiber ceramic grade CF1.
Download Brochure (pdf/5.2MB).
|
|
 |
Cera-Notch Grooving and Threading System
Kyocera’s Cera-Notch System for grooving, threading, face grooving, and deep grooving.
Download Brochure (pdf/1.2MB).
|
|
 |
CJ Chipbreaker
Good chip evacuation at small depths of cut and high feed rates. Low cutting resistance. Improved chip evacuation when profi ling and pulling up. Combined with the CA55 series, high efficiency and long tool life is assured for shaft profiling.
Download Brochure (pdf/418KB).
|
|
 |
Double-Clamp Toolholder Series
Kyocera’s new Double-Clamp Toolholders securely clamp the inserts with a single action providing increased clamping rigidity, improved machining stability, and greater insert life.
Download Brochure (pdf/3.24MB).
|
 |
Double-Sided Swiss Tools
Double the cost savings with Kyocera’s new double-sided negative inserts. The new innovative double-sided design allows both edges to be used. Compared to the positive type, the double-sided design offers less cost per edge and more stability.
Download Brochure (pdf/1.61MB).
|
 |
Drilling
Kyocera’s new Drilling Brochure details the popular line of Magic Drills along with Kyocera’s newest line of drills including the Holeshot Drill, the Coremaster Coredrill, and the Stinger Drill.
Download Brochure (pdf/5.1MB).
|
|
 |
KBN510/KBN525 Micro-grain CBN Grades
The uniform distribution of the CBN material improves both wear resistance and toughness. KBN510 is for general purpose and finishing of hardened steels while KBN525 is ideal for interrupted machining of hardened steels.
Download Brochure (pdf/627KB)
|
|
 |
KTKF Brochure
KTKF back turning, threading, and cut-off tools for Swiss machining.
Download Brochure (pdf/2.1MB).
|
|
 |
M-Series Milling
The new 48 page M-Series Milling brochure incorporates all of Kyocera’s popular M-Series milling cutters including the MEC Ultra Hurricane Endmills & Facemills, the MECX Ultra Hurricane Fine-Pitch Endmills & Facemills, the MECH Helical Endmills, the MEY Ultra Drill Mills, the MSR “Monster” Heavy Roughing Cutters, and the brand new MSRS Square Insert MSR Facemills.
Download Full Brochure (pdf/14MB)
|
|
 |
Magic Drill
The Magic Drill has 4 available corners to promote increased efficiency. Molded chipbreaker produces 3 separate chips for smooth chip evacuation. The new silver nickel coating prolongs tool life and improves chip flow. Inserts are now available in PR830 and PR1025, PVD coated carbides for general steel applications.
Download Full Brochure (pdf/1.5MB)
|
|
 |
MECH Helical End Mill
The new MECH Helical Endmill is the best solution for eliminating heavy milling problems. Advantages include maximized machining efficiency, improved chip evacuation, and reduced cutting force.
Download Brochure (pdf/3MB).
|
|
 |
MEC Ultra Hurricane Endmills & Facemills
The MEC-series cutters are designed to offer higher productivity. The unique design lowers cutting forces, withstands heavier cuts and allows for increased feedrates. A silver coating and larger chip pocket radius protect the tool. There are seven insert radii, 0.008", 0.016", 0.031", 0.047", 0.", 0.079", and 0.122" available in cast iron, steel, and stainless steel grades.
Download Brochure (pdf/1.7MB).
|
|
 |
MECX Fine-Pitch Endmills and Facemills Brochure
Extra fine-pitch increases machining efficiency, lowers cutting forces and is ideal for lower horsepower machines. Available inserts include PR830 for steel, PR905 for cast iron and PR1025 for stainless steel.
Download Brochure (pdf/2.6MB).
|
|
 |
MEGACOAT CBN
Kyocera's new PVD Coated CBN featuring new Megacoat PVD Coating Technology.
Download Brochure (pdf/2.8MB).
|
|
 |
MSR Heavy Roughing Milling Cutter
The MSR "Monster" heavy roughing milling cutter doubles productivity by doubling the metal removal rate. Notched inserts promote larger depths of cut and excellent chip control. Heavy machining with low cutting forces.
Download Brochure (pdf/917KB).
|
|
 |
OFMT Octogonal Milling Inserts
Octogonal milling inserts with 8 cutting edges are available in PVD coated carbide grades for steel, stainless steel, and cast iron.
Download Brochure (pdf/604KB).
|
|
 |
OTM API Ring Groover
Kyocera’s OTM API Ring Groover is ideal for high pressure and high temperature applications in the oil, gas and petrochemical industries. With a low cost per cut and free cutting geometry, it is the most economical way to make API Ring Grooves.
Download Brochure (pdf/896MB).
|
|
 |
OTM Milling
The OTM Milling Line features an economical selection of end mills, face mills, and chamfer mills for a variety of applications. The brochure also includes information on ordering customized tooling for your specific milling applications.
Download Brochure (pdf/4.2MB).
|
|
 |
PH/PX Chipbreaker
The CA55 Series coated carbide large I.C. inserts are perfect for heavy machining applications.
Download Brochure (pdf/1MB).
|
|
 |
SIGE Internal Grooving
SIGE Internal Grooving toolholders and inserts for small diameter I.D. grooving. The innovative toolholder design provides cost effective chip evacuation and control.
Download Brochure (pdf/892KB).
|
|
 |
TN6020/PV7020 Super Micro-grain Cermet Brochure
Achieve higher cutting speeds and excellent surface finishes
with super micro-grain size TN6020 and PV7020. The fine grain
size provides improved toughness and stability which in turn
leads to greater productivity. Use when excellent surface finishes
are required.
Download Brochure (pdf/1.92MB).
|
|
 |
Ultra Drill Mill
The MEY multi-function endmill is capable of slant milling, helical milling, drilling, shouldering, pocketing, and grooving. PVD Coated Carbide grades are available in PR830 for steel and stainless and PR905 for cast iron.
Download Brochure (pdf/690KB).
|
|
 |
VF Chipbreaker
Good chip evacuation at small depths of cut and high feed rates. Low cutting resistance. Improved chip evacuation when profiling and pulling up. Combined with the CA55 series, high efficiency and long tool life is assured for shaft profiling.
Download Brochure (pdf/419KB).
|
|
Page Top